Adapter large harbor reel MMA1 or DEVAUX MATIX

Transform your MMA1 or DEVAUX MATIX reel into a large harbor!

The adapter we offer is an ideal solution for transforming your MMA1 or Devaux mATIX type reel spools at a lower cost into a ' large harbor ' with an axis diameter more than doubled: 40 or 50mm.

Semi-automatic reels are very popular in PALM for their solidity and lightness, especially for nymph or dry fishing in fast waters, or even for toc . A disadvantage of this reel is nevertheless the small diameter of the shaft (18.4mm) which tends to twist the line and reduces the speed of recovery and therefore fishing. The usual solution by adding backing unnecessarily weighs down the reel and makes drying longer and more difficult when returning from fishing, as well as crafts using foam or other materials.

The adapter is exclusively designed for the spools of the semi-automatic reel MMA1, DEVAUX MATIX or equivalent (17.8mm between flanges) . It consists of two interlocking half-pieces that can be firmly attached to the reel by a pin and side screws. A hole is also provided for attaching the backing to the reel. The adapter can be dismantled and reassembled several times if necessary.

Metallic black in color, it is very discreet once mounted on the reel.

There are several models to adapt perfectly to your style of fishing and your equipment:

• 2 diameters of 40 and 50mm: the 40mm model can accommodate a natural or synthetic DT3 line and a little backing if necessary; the 50mm model is intended for those who fish in nymph with only wire or toc;
• 2 weights: a light model (L) that does not weigh down the reel is ideal for those who are looking for lightness or do not wish to disturb the current balance of their rod/reel assembly. The heavy model (P) slightly improves the static rod/reel balance for rods that are a little too heavy at the head. Its weight shifts the point of balance depending on the type of rod by approximately 1 cm towards the heel of the rod for the OT50P.
  

The different models are compatible with the addition of an adaptable crank on the reel (notches on the 50mm models facilitate assembly).

Exclusive French manufacturing and ecodesign

The design is specific to Meilleursmoucheurs.fr, which markets the product exclusively. The manufacture is also French.

The adapter is made of PLA , a biobased material and uses little material thanks to 3D printing.

In the package of your Large Harbor adapter

• Adapter with pin and stainless steel screws.
• PDF assembly instructions sent by email